Reference topics: 6.002 ยท independent study notes, not affiliated

Circuits and Electronics

Introduces the fundamentals of circuit analysis and electronics. Topics include resistive networks, Thevenin and Norton equivalents, capacitors, inductors, first- and second-order transients, operational amplifiers, and MOSFET logic. Laboratory work is included.

8Lectures
2Assignments
2Exams
1hDuration
1

Lumped Abstraction and KVL/KCL

Overview Lumped-element abstraction treats each component as a two-terminal black box. Key ideas KVL: voltages around a loop sum to zero. KCL: currents into a node sum to zero. Plus V-I relations,...

โฑ 1 min read

Overview

Lumped-element abstraction treats each component as a two-terminal black box.

Key ideas

  • KVL: voltages around a loop sum to zero.
  • KCL: currents into a node sum to zero.
  • Plus V-I relations, solves any linear circuit.

Worked example

Series loop with 9V source and two resistors: V1 + V2 = 9.

Common pitfalls

  • Forgetting KVL needs a closed loop.

Why it matters

When circuit size approaches signal wavelength, you need Maxwell.

2

Resistive Networks and Node Analysis

Overview Resistors obey Ohm law. Node analysis is systematic. Key ideas Choose ground. Write KCL at every node. Solve linear system. Worked example Two unknown nodes, three resistors, one source...

โฑ 1 min read

Overview

Resistors obey Ohm law. Node analysis is systematic.

Key ideas

  • Choose ground.
  • Write KCL at every node.
  • Solve linear system.

Worked example

Two unknown nodes, three resistors, one source gives two equations.

Common pitfalls

  • Missing currents at a node.

Why it matters

With N nodes, you always get N-1 equations.

3

Superposition and Thevenin/Norton

Overview Two powerful simplifications for linear circuits. Key ideas Superposition: sum of single-source responses. Thevenin: Vth in series with Rth. Norton: current source in parallel with R. Worked...

โฑ 1 min read

Overview

Two powerful simplifications for linear circuits.

Key ideas

  • Superposition: sum of single-source responses.
  • Thevenin: Vth in series with Rth.
  • Norton: current source in parallel with R.

Worked example

Rth = Voc/Isc. Then any load sees a simple two-element source.

Common pitfalls

  • Applying to nonlinear circuits.

Why it matters

Reduces a complex circuit to two numbers.

4

Capacitors and Inductors

Overview Two components that store energy. Key ideas Capacitor: i = C dV/dt. Inductor: v = L di/dt. Energy: 0.5 C V^2, 0.5 L I^2. Worked example 1 uF at 5V holds 12.5 uJ. Common pitfalls Forget...

โฑ 1 min read

Overview

Two components that store energy.

Key ideas

  • Capacitor: i = C dV/dt.
  • Inductor: v = L di/dt.
  • Energy: 0.5 C V^2, 0.5 L I^2.

Worked example

1 uF at 5V holds 12.5 uJ.

Common pitfalls

  • Forgetting discontinuity constraints.

Why it matters

These are the memory elements of analog design.

5

First-Order Transients

Overview RC and RL circuits respond with an exponential curve. Key ideas tau = RC or L/R. After 1 tau, ~63% done. After 5 tau, settled. Worked example 10 kohm and 1 uF: tau = 10 ms. A 5V step reaches...

โฑ 1 min read

Overview

RC and RL circuits respond with an exponential curve.

Key ideas

  • tau = RC or L/R.
  • After 1 tau, ~63% done.
  • After 5 tau, settled.

Worked example

10 kohm and 1 uF: tau = 10 ms. A 5V step reaches 3.16V after 10 ms.

Common pitfalls

  • Wrong sign in the exponential.

Why it matters

The time constant is the fundamental timescale.

6

Second-Order Transients

Overview RLC circuits are second-order. Key ideas omega_0 = 1/sqrt(LC). zeta determines damping. Underdamped: oscillations with decay. Worked example L=1mH, C=1uF: omega_0 ~ 31,623 rad/s. Common p...

โฑ 1 min read

Overview

RLC circuits are second-order.

Key ideas

  • omega_0 = 1/sqrt(LC).
  • zeta determines damping.
  • Underdamped: oscillations with decay.

Worked example

L=1mH, C=1uF: omega_0 ~ 31,623 rad/s.

Common pitfalls

  • Ignoring R controls damping.

Why it matters

Second-order behaviour is everywhere.

7

Operational Amplifiers

Overview High-gain differential amplifier with feedback. Key ideas Ideal: infinite gain, infinite input Z, zero output Z. Virtual short with feedback. Inverting, non-inverting, summing. Worked...

โฑ 1 min read

Overview

High-gain differential amplifier with feedback.

Key ideas

  • Ideal: infinite gain, infinite input Z, zero output Z.
  • Virtual short with feedback.
  • Inverting, non-inverting, summing.

Worked example

Non-inverting gain 5: Rf/R1 = 4.

Common pitfalls

  • Forgetting feedback.

Why it matters

Op-amps are the workhorse of analog design.

8

MOSFETs and Digital Logic

Overview The MOSFET is a voltage-controlled switch. Key ideas Digital: on or off. CMOS inverter: one PMOS, one NMOS. NAND/NOR are the building blocks. Worked example CMOS inverter with input 0...

โฑ 1 min read

Overview

The MOSFET is a voltage-controlled switch.

Key ideas

  • Digital: on or off.
  • CMOS inverter: one PMOS, one NMOS.
  • NAND/NOR are the building blocks.

Worked example

CMOS inverter with input 0 outputs VDD.

Common pitfalls

  • Assuming perfect switches.

Why it matters

Every processor is billions of MOSFETs.

๐Ÿ“ Resistive Circuits

Q1. Find Thevenin equivalent.

Show Solution

Rth = Voc/Isc.

Q2. Solve 3-node circuit by node analysis.

Show Solution

KCL at each non-ref node.

๐Ÿ“ Transients

Q1. Find v_C(t) for step input.

Show Solution

v_C = Vf + (Vi - Vf) exp(-t/RC).

Q2. Classify RLC damping.

Show Solution

zeta = (R/2) sqrt(C/L).

๐ŸŽฏ Midterm Exam

Q1. Two-source network via superposition.

Show Solution

Sum of single-source results.

Q2. Time constant of RC.

Show Solution

tau = Req * C.

๐ŸŽฏ Final Exam

Q1. Non-inverting amp gain 5.

Show Solution

1 + Rf/R1 = 5.

Q2. LPF frequency response.

Show Solution

-20 dB/dec above fc.