Circuits and Electronics
Introduces the fundamentals of circuit analysis and electronics. Topics include resistive networks, Thevenin and Norton equivalents, capacitors, inductors, first- and second-order transients, operational amplifiers, and MOSFET logic. Laboratory work is included.
Lumped Abstraction and KVL/KCL
Overview Lumped-element abstraction treats each component as a two-terminal black box. Key ideas KVL: voltages around a loop sum to zero. KCL: currents into a node sum to zero. Plus V-I relations,...
Overview
Lumped-element abstraction treats each component as a two-terminal black box.
Key ideas
- KVL: voltages around a loop sum to zero.
- KCL: currents into a node sum to zero.
- Plus V-I relations, solves any linear circuit.
Worked example
Series loop with 9V source and two resistors: V1 + V2 = 9.
Common pitfalls
- Forgetting KVL needs a closed loop.
Why it matters
When circuit size approaches signal wavelength, you need Maxwell.
Resistive Networks and Node Analysis
Overview Resistors obey Ohm law. Node analysis is systematic. Key ideas Choose ground. Write KCL at every node. Solve linear system. Worked example Two unknown nodes, three resistors, one source...
Overview
Resistors obey Ohm law. Node analysis is systematic.
Key ideas
- Choose ground.
- Write KCL at every node.
- Solve linear system.
Worked example
Two unknown nodes, three resistors, one source gives two equations.
Common pitfalls
- Missing currents at a node.
Why it matters
With N nodes, you always get N-1 equations.
Superposition and Thevenin/Norton
Overview Two powerful simplifications for linear circuits. Key ideas Superposition: sum of single-source responses. Thevenin: Vth in series with Rth. Norton: current source in parallel with R. Worked...
Overview
Two powerful simplifications for linear circuits.
Key ideas
- Superposition: sum of single-source responses.
- Thevenin: Vth in series with Rth.
- Norton: current source in parallel with R.
Worked example
Rth = Voc/Isc. Then any load sees a simple two-element source.
Common pitfalls
- Applying to nonlinear circuits.
Why it matters
Reduces a complex circuit to two numbers.
Capacitors and Inductors
Overview Two components that store energy. Key ideas Capacitor: i = C dV/dt. Inductor: v = L di/dt. Energy: 0.5 C V^2, 0.5 L I^2. Worked example 1 uF at 5V holds 12.5 uJ. Common pitfalls Forget...
Overview
Two components that store energy.
Key ideas
- Capacitor: i = C dV/dt.
- Inductor: v = L di/dt.
- Energy: 0.5 C V^2, 0.5 L I^2.
Worked example
1 uF at 5V holds 12.5 uJ.
Common pitfalls
- Forgetting discontinuity constraints.
Why it matters
These are the memory elements of analog design.
First-Order Transients
Overview RC and RL circuits respond with an exponential curve. Key ideas tau = RC or L/R. After 1 tau, ~63% done. After 5 tau, settled. Worked example 10 kohm and 1 uF: tau = 10 ms. A 5V step reaches...
Overview
RC and RL circuits respond with an exponential curve.
Key ideas
- tau = RC or L/R.
- After 1 tau, ~63% done.
- After 5 tau, settled.
Worked example
10 kohm and 1 uF: tau = 10 ms. A 5V step reaches 3.16V after 10 ms.
Common pitfalls
- Wrong sign in the exponential.
Why it matters
The time constant is the fundamental timescale.
Second-Order Transients
Overview RLC circuits are second-order. Key ideas omega_0 = 1/sqrt(LC). zeta determines damping. Underdamped: oscillations with decay. Worked example L=1mH, C=1uF: omega_0 ~ 31,623 rad/s. Common p...
Overview
RLC circuits are second-order.
Key ideas
- omega_0 = 1/sqrt(LC).
- zeta determines damping.
- Underdamped: oscillations with decay.
Worked example
L=1mH, C=1uF: omega_0 ~ 31,623 rad/s.
Common pitfalls
- Ignoring R controls damping.
Why it matters
Second-order behaviour is everywhere.
Operational Amplifiers
Overview High-gain differential amplifier with feedback. Key ideas Ideal: infinite gain, infinite input Z, zero output Z. Virtual short with feedback. Inverting, non-inverting, summing. Worked...
Overview
High-gain differential amplifier with feedback.
Key ideas
- Ideal: infinite gain, infinite input Z, zero output Z.
- Virtual short with feedback.
- Inverting, non-inverting, summing.
Worked example
Non-inverting gain 5: Rf/R1 = 4.
Common pitfalls
- Forgetting feedback.
Why it matters
Op-amps are the workhorse of analog design.
MOSFETs and Digital Logic
Overview The MOSFET is a voltage-controlled switch. Key ideas Digital: on or off. CMOS inverter: one PMOS, one NMOS. NAND/NOR are the building blocks. Worked example CMOS inverter with input 0...
Overview
The MOSFET is a voltage-controlled switch.
Key ideas
- Digital: on or off.
- CMOS inverter: one PMOS, one NMOS.
- NAND/NOR are the building blocks.
Worked example
CMOS inverter with input 0 outputs VDD.
Common pitfalls
- Assuming perfect switches.
Why it matters
Every processor is billions of MOSFETs.
๐ Resistive Circuits
Q1. Find Thevenin equivalent.
Show Solution
Rth = Voc/Isc.
Q2. Solve 3-node circuit by node analysis.
Show Solution
KCL at each non-ref node.
๐ Transients
Q1. Find v_C(t) for step input.
Show Solution
v_C = Vf + (Vi - Vf) exp(-t/RC).
Q2. Classify RLC damping.
Show Solution
zeta = (R/2) sqrt(C/L).
๐ฏ Midterm Exam
Q1. Two-source network via superposition.
Show Solution
Sum of single-source results.
Q2. Time constant of RC.
Show Solution
tau = Req * C.
๐ฏ Final Exam
Q1. Non-inverting amp gain 5.
Show Solution
1 + Rf/R1 = 5.
Q2. LPF frequency response.
Show Solution
-20 dB/dec above fc.